OSHA Violations: What Happens Next and How to Respond
Understanding how to handle OSHA violations is crucial for safety officers and professionals in high-risk industries like construction.
When an OSHA violation occurs, it can be daunting for safety officers, construction companies, and businesses in high-risk industries. But by understanding what steps to take and how to prevent future violations, you can ensure a safer work environment.
What Happens When OSHA Standards Are Violated?
When OSHA standards are violated, employers may face citations, financial penalties and requirements to correct the identified hazards. The outcome depends on the nature of the violation, the risks involved and the findings of an OSHA inspection.
Not every workplace safety violation results in the same enforcement action. A serious OSHA violation, for example, involves a hazard that could cause death or serious physical harm and that the employer knew, or should have known, about. Other violations may involve less severe hazards or failures to meet specific regulatory requirements.
An OSHA citation can also be issued without a workplace injury occurring. Employers are responsible for maintaining safe working conditions and complying with applicable standards, regardless of whether a hazard has already resulted in an incident.
For a detailed breakdown of violation categories and financial penalties, read our guide to OSHA fines.
What Should Employers Do After Receiving an OSHA Citation?
Receiving an OSHA citation requires employers to assess the findings, address any immediate safety risks and determine the appropriate response. Each citation identifies specific compliance concerns that must be reviewed before corrective actions can be completed.
Review the Citation and Identify the Requirements
Start by reviewing the Citation and Notification of Penalty to understand which OSHA standards have allegedly been violated, the conditions identified during the inspection and the proposed abatement deadlines. Establish which departments, equipment or work areas are affected and determine whether the same conditions exist elsewhere in the organisation.
Address Immediate Workplace Hazards
Depending on the violation, this could involve removing defective equipment from service, restricting access to hazardous areas or introducing temporary controls while permanent corrective measures are arranged. Assign responsibility for managing the response, coordinating corrective actions, and maintaining the necessary documentation.
Notify Employees and Assign Responsibilities
Federal OSHA requires employers to post citations at or near the location of the cited violation, or in another readily observable location where appropriate. The citation must remain posted for at least three working days or until the violation is corrected, whichever is longer.
How Long Do Employers Have to Respond to an OSHA Citation?
Under federal OSHA regulations, employers have 15 working days from receiving a citation to formally contest the citation or proposed penalties. Weekends and federal holidays are excluded from this period.
Employers who disagree with the findings can request an informal conference with their local OSHA Area Office. This allows them to discuss the cited violations, proposed penalties, abatement requirements and any supporting evidence.
Employers who wish to formally contest a citation or proposed penalty must submit a written Notice of Intent to Contest to the appropriate OSHA Area Director within the required period. Contested matters are referred to the Occupational Safety and Health Review Commission for independent review.
Citation response deadlines and hazard correction deadlines are not necessarily the same. Each citation specifies the applicable abatement requirements, and the effect of a formal contest on those requirements depends on what is being contested and the applicable procedures.
Employers should consult OSHA’s official guidance on employer rights and responsibilities to understand the requirements associated with their citation.
How Do Employers Correct OSHA Violations?
Start by addressing the cited condition, complying with the applicable abatement requirements and providing OSHA with the necessary verification that corrective actions have been completed.
This process is known as abatement.
1. Develop and Implement Corrective Actions
Each cited violation should be assessed to determine the appropriate corrective measures. Depending on the findings, this may involve repairing or replacing equipment, modifying work procedures, installing additional safeguards or providing necessary employee training.
For complex violations, employers may need to establish a corrective action plan with assigned responsibilities, completion dates and interim measures to protect employees while permanent solutions are implemented.
2. Document Completed Corrections
Maintain evidence showing how each cited violation was addressed with supporting records that include:
- Photographs showing corrected workplace conditions
- Equipment repair or maintenance records
- Updated safety procedures and inspection reports
- Employee training records
- Completed corrective action reports and verification records
Under 29 CFR 1903.19, employers are required to submit abatement certification within 10 calendar days after the abatement date. An exception applies when an OSHA compliance officer observes the correction during the inspection and records it in the citation.
Additional supporting documentation is required for willful and repeated violations, as well as certain serious violations identified by OSHA.
3. Verify That the Hazard Has Been Resolved
Before closing a corrective action, safety managers need to confirm that the implemented measures have addressed the cited condition and that employees are no longer exposed to the identified hazard. This verification should be documented and retained with the original citation records.
What Happens if an OSHA Violation is Not Corrected?
A failure-to-abate violation may be issued when OSHA determines that a previously cited hazardous condition remains uncorrected after the required deadline. These violations can result in daily penalties for continued non-compliance.
Employers who cannot meet an established abatement deadline due to circumstances beyond their reasonable control may be able to request an extension through a Petition for Modification of Abatement (PMA). Such requests must follow OSHA’s procedures and demonstrate the steps already taken towards compliance, the additional time required and the measures being used to protect affected employees.
Allowing unresolved violations to remain open can increase financial exposure and prolong unsafe workplace conditions.
How Can Employers Prevent Repeat OSHA Citations?
1. Review the Root Cause of the Violation
Examine the circumstances that led to the citation. Identifying these contributing factors helps employers determine whether corrective measures need to extend beyond the location identified during the OSHA inspection.
2. Monitor Corrective Actions Across Worksites
Follow-up inspections and periodic reviews can help verify that implemented controls remain effective. Recurring issues should be investigated to determine whether further procedural changes or employee training are necessary.
3. Maintain Accessible Compliance Records
SiteDocs Corrective Actions helps safety teams document identified issues, assign corrective tasks, monitor progress and maintain supporting records. This provides greater visibility into unresolved hazards and helps teams manage corrective actions consistently across different jobsites.
By reviewing the causes of previous violations and verifying that corrective measures remain effective, employers can reduce the risk of recurring compliance issues and future OSHA citations.
Want to learn more? Read our in-depth guide on how to stay OSHA compliant.
Frequently Asked Questions
Yes. OSHA can issue citations when an inspection identifies violations of applicable workplace safety and health requirements, even if no injury or incident has occurred. Employers are responsible for protecting workers from recognised hazards and maintaining compliance with OSHA standards.
Not necessarily. Correcting a hazard during an inspection does not automatically prevent OSHA from issuing a citation. However, prompt corrective action may be considered during the enforcement process. If an OSHA compliance officer verifies that a violation was corrected during the inspection and records this in the citation, the employer may be exempt from the usual abatement certification requirement for that item.
No. States operating OSHA-approved State Plans may have different enforcement procedures, abatement requirements and citation contest processes. Employers should consult the applicable state occupational safety and health agency to confirm their responsibilities and deadlines.
No. Correcting the cited hazard fulfils the relevant abatement obligation but does not automatically cancel the citation or associated penalties. Employers must follow the formal contest or settlement process if they wish to challenge a citation. Once a citation becomes a final order, correcting the violation does not, by itself, remove it from the employer's enforcement history.
Read More
What Is OSHA? Meaning, Purpose and Who It Covers
Learn what OSHA stands for, its purpose, how it protects workers and which employers it covers. Understand the agency’s role in US workplace safety.
How to Build a Safety Observation Program That Identifies Risk Early
Build a safety observation program that helps identify hazards early. Learn six steps for observations, reporting, analysis, and follow-up.
Contractor Prequalification Checklist: What to Verify Ahead of Time
Use this contractor prequalification checklist to review licenses, insurance, safety records, and certifications before work begins.
SafeTrades NEW
Safety Consultant Program